The Screwdriving System is composed of a feeding system and a lock-locking system, wherein the feeding part, also called a screw-arrangement machine and a screw feeder, is a relatively simple type of screw arranged in a row for the purpose of improving work efficiency. Automation equipment, widely used in the electronics industry. A machine can be used for a variety of screws
The size range of the screw has been adjusted to a certain extent. From M1 to M8, and for special screws, there is an operable space, designed separately.
1:1 short screws, with washer screws can be universal!
The track adjustment is convenient! The track of the screw machine can be freely adjusted! It is easy to understand and easy to operate!
The current screw machine has been very mature in technology, so the phenomenon of the card screw machine has rarely happened again. If there is a phenomenon of missing screws, it will automatically alarm, so it reduces the worker's work to do nothing.
Now the screw machine equipment, independent control in the feeding system and vibration drive, can freely set the ideal delay stop time. When abnormal conditions occur, the screw machine starts the fault alarm function! It is as simple as other screw machines!
1.When removing the screw, position the screw head as long as the tip is placed in the guide of the bit, slide down the guide, and then pull the screw out toward the front.
2. Compared with the traditional screw plate, each screw can save 1.4 seconds and the productivity can reach 6 times!
3.Easy to operate, even if you have a raw hand, you can learn how to operate immediately.
4.It is not necessary to align the screws, just put the screws into the feeding room in batches.
5. Widely used in various electronic industries, automobiles, televisions, air conditioners and other industries that require screws.