The overall structure of the self-synchronizing vibrating feeder, it can be seen that the exciter of the self-synchronizing vibrating feeder is composed of a pair of parameters that are close to the same excitation motor, and the two excitation motors are usually installed in parallel at the rear of the trough body. Below the side or the trough, and symmetric to the longitudinal plane of symmetry of the vibrating feeder. The angle between the axis of the two excitation motors and the plane of the bottom of the groove and the required vibration direction angle are complementary angles. The axis of the two excitation motors can also be perpendicular to the plane of symmetry of the groove body and installed in the vibration disk slot. The back of the body. At this time, the symmetry of the longitudinal symmetry plane of the trough should not be destroyed. In this case, the angle between the motor base and the plane of the bottom of the trough should also be the complementary angle to the required vibration direction angle. The structure is basically the same as that of the vibrating plate vibration damper.
According to the self-synchronization principle, after the two motors are started, they will enter the synchronous state very quickly, that is, operate at the same number of revolutions. The inertial forces generated by the eccentric blocks of the two motors cancel each other in the direction of the two-axis connection, and The axial connection line is superimposed on the excitation force in the vertical direction. It is changed according to the sinusoidal law. This excitation force makes the vibration vibration feeder obtain the vibration necessary for conveying the material. SWOER has the exquisite vibration feeder practice technology and The perfect product solution is widely favored by people from all walks of life. Currently used in medical device industry, pharmaceutical industry, food industry, toy industry, stationery industry, daily necessities industry, electronics industry, hardware industry, plastic industry, watch industry, battery industry, food industry, connector industry, manufacturing, etc. Widely procured in various industries The first multi-functional equipment to solve the supply of industrial automation equipment--in addition to satisfying the ordering of products, it can also be used for sorting, testing, counting and packaging.