Follow us
Home > Knowledge > Content
Linear vibrator maintenance
Mar 14, 2018

In the cold northern winter, the maintenance of the one-way bearing of the linear vibrator is even more important. Because the one-way bearing as the core component of the feeder, although using the original NSK bearing, the failure rate is extremely low, but in order to use more safely and efficiently, the one-way bearing maintenance should pay special attention. Let's talk about the maintenance of the linear feeder in winter.

A. Due to the low temperature in winter, in the normal use process, the staff should remember to add butter on time, and regularly use the hand-held oil gun to add oil once every month to the grease nozzle to increase the lubrication of the bearing and maintain its good operation. ability.

B. Pay attention to the use of lubricating grease on the roller feeder. Care should be taken to choose a butter with a lower viscosity and use different greases according to different temperatures.

C. When the feeder is parked for more than four hours after it is not in use in the cold winter, the sensitivity of the feeder is slower than usual, and it is more prone to accidents than other seasons. Therefore, the feeder should be inspected before each use. Work, at the same time check the fastening screws on the bearing sleeve to avoid damage due to too low a temperature, so as to cause damage to the operator.